Automobile Parts Molds To Spain

Automobile parts molds to Spain

Automobile mold for inner trim:

-Panel sets molds

-Air system mold

-Controlling system mold

-Other IMD mold

Automobile mold for exter trim:

-Auto bumoer mold

-Grille mold

-Shock absorber mold

Auto lighting system mold

-Front lamo mold

-Rear lamp mold

Aoxu Mould Technology has a very strong managing and QC team, the team included totally more than 10 people. From the plastic parts 3D model to the mould T1, we have very rigorous analysis, stufy and quality controlling, 3D plastic injection anaylyzing.

When we got the plastic 3D model from our customer, we will have a meeting with all the related officers to discuss about the 3D design shortcoming...to fins if there is any place has the tooling problem. For example: de-moulding angle, strength, plastic filling, deforming, thickness, texture...after all these discussing, we will start to make mold-flow analyzing. If there is any questions or problems, we will contact to our customer.

Automobile mold design technical meeting. All our related officers will have the meeting for the mould design, in this meeting, all the technical points will be mentionedout. Such like the mold steel, mold basic structure, plastic material and it's MFI, custmer's special requirements, customer's injection machines's parameters. the components machining process...

After the automobile mold design ready, the mold design QC department will start the inspection of the mold design.

Mold structure inspection, mold action and guiding system inspection, mold injection system inspection, mold cooling system inspection, mold ejection system inspection, mold easy damage area inspection, etc.

When we got the design approval from our customer, we will start the steel cutting, for the steel inspection, we use a good quality scan device to check if there is any crack or impurities. And the hardnedd measurer will tell us if the hardness is ok or even.

During the machining, we also do basic quality controlling, we need to check the steel hardness. We make two or 3 stages machining. 1st stage is rough machining, some time we make half presion machining. The final stage is precise high speed milling or machining. We always considered the steel deform when machining on it...

After machining CMM &. Other dimension controlling. After the machining processed, we have 2 sets of CMM, 1 projection measuring instruments for cavities/cores and other components dimension checking. If the dimension meets the tolerance, then we will take it to our assembling shop.Otherwise, we will do remachining immediately.

We have QC officers and project manager will control the quality points when the mold assembling.

Before the mold T1, the mold will be disassembled for QC, and we have the T1 standard. If the mold does not meet the standard. We can not make any mold testing.

All the dats such like: Mold design, tooling drawings, various inspection records, mold weekly log, mold testing report, mold testing videos, mold operation manual...We send to our customer during the mold processing period.

Aoxu Automobile Mold is determing to be one of the best auto mold supplier in the world. Please kindly come to us for futher checking, we are sure you will be satisfied.

[email protected]