English
Français
Español
Professional maker fan plastic injection mould with high quality
Professional maker fan plastic injection mould with high quality
Mould Specification
Mould Name: professional maker fan plastic injection mould with high quality
Dimension: ø380*30mm
Weight : 515g
Material : PP/ ABS/ PA+GF
Mold steel: P20/ 718H/ H13/ S136
Mold base SC45
Injection system : Cold runner
Cavity number : Single
Ejection system: Ejector pins, automatical drop
Payment Term: T/T
Port: FOBNingbo
Design of plastic fan injection mould gate
1. The parts connected with the sprue and plastic parts should be R0.5 rounded or 0.5 X45 chamfered; Doors and ports connect a general 30° to 45° Angle, and R1 and R2 arc grooves bottom connected.
2. Type of gate
Gates come in a variety of forms, but 11 are commonly used
Direct gate, side gate, fan-shaped gate, point gate, hidden gate, horn gate, etc
3. Selection of fan runner and gate
Because of the large size and complex shape of plastic blades, single mode is adopted. Due to the large blade size and thin wall thickness, high precision requirements, gate appearance design, runner must have the characteristics of fast filling mold, uniform flow. On this basis, the design is straight sprue. In this way, the process from the gate to the outside of each blade is equal, and it can ensure fast filling, and it is easy to exhaust when filling the mold, cut the gate, and do not produce fusion marks, and ensure the appearance quality.
If you are looking for professional maker fan plastic injection mould with high quality, please do not hesitate to contact us!
.png?imageView2/2/w/105/h/83/format/jp2/q/75)
