English
Français
Español
Injection Mold For Plastic Fan Housing
Mould Specifications
Mould Name: Injection Mold For Plastic Fan Housing
Product Name: Plastic Fan Housing
Product Material: PP, PC, ABS, etc.
Mould Material: P20, 718, etc.
Runner System: Cold/Hot Runner
Nos. Of Cavity: Single
Mould Design software: UG, PROE, CAD, Solidworks, CATIA, etc.
Mould Life Cycle: 500,000shots
Delivery Time: 35-55 days or depend on the project.
The process of raw material PP
-
Operating temperature: it can be used stably at 100°C for a long time
-
Properties: tensile strength, compressive strength, surface hardness and elastic modulus are excellent, almost no water absorption
-
Molding features: 1. The molecular structure contains tertiary atoms, so the antioxidant capacity is low, antioxidants should be added before plasticizing.
2. Degradation occurs at more than 280°C, so long retention of molten material in the barrel should be avoided during molding.
3. Good body fluidity, easy to form long process plastic parts.
4. The melting point and melting point enthalpy are higher than LDPE, and more heat will be released in the crystallization and cooling process, so the mold has a better cooling system.
5. Due to thermal shrinkage and crystallization, the specific volume changes greatly in the molding process.
6. The low temperature and high pressure orientation of the melt is obvious, so the forming temperature should be controlled.
7. Large shrinkage, brittle at low temperature, uniform wall thickness is required.
.png?imageView2/2/w/105/h/83/format/jp2/q/75)
